Skip to main content
All CollectionsEcochain HelixGetting Started with HelixData Entry
Helix - How to: Use and End-of-Life scenarios
Helix - How to: Use and End-of-Life scenarios

This article and video helps you to make a Use scenario and describes how to establish a basic End-of-Life (EoL) scenario.

Artjom Janssen avatar
Written by Artjom Janssen
Updated over a week ago

How to make Use and EoL scenarios in Ecochain

On the 'Use and EoL stage' page you can manage (i) use and (ii) end-of-life scenarios, as well as link them to your product portfolio. Below the step-by-step guide, you can find an in-depth video in which our specialist guides you through the key elements. For a better watching experience of the video, we recommend downloading the file.

Step-by-step guide

  1. Open the product scenario page (step 4 in the Ecochain menu).

  2. Click 'create new scenario' under 'use scenario' (green button).

  3. Insert name, description, and the unit the scenario takes place. (For example, 5000 hrs for a lamp, 80000 km for a car, or 50 washingcycles.)

  4. Add impact items of usages and emissions. (For example, amount of electricity or amount of diesel.)

  5. Add extra materials/transport via the databases of Ecochain. (For example, soap in a washing scenario.)

  6. Ecochain will automatically calculate the total impact per product inserted in step 3 in the Ecochain menu.

  7. When added all impact items, materials, and transport, click 'Save'.

  8. When also implementing an end-of-life scenario, click 'create new scenario' under 'end-of-life scenario'.

  9. This scenario defines what happens to a product and its materials when the end-of-life stage has been reached.

  10. Under Material processing, add scenarios to specify what happens to materials in the waste phase of the product.

  11. Use the recycling percentage to indicate how much of a selected material follows the given scenario.

  12. Add impact items, materials, and transport to expand the end-of-life scenario even further.

  13. In two situations we advise you to contact our LCA specialists:
    1. if your product is used in the end-of-life phase as a fuel for the generation of energy
    2. if the product uses virgin materials, but you have an internal process in place to recycle or reuse these materials.

  14. Click 'Save'.

  15. Link the scenarios to the products under 'Products', by using the button 'Add use scenario' or 'Add end-of-life scenario'.

  16. Fill in the total lifetime of how many times the scenario is implemented.

  17. Complete your LCAs under step 3 'Done' in the Ecochain menu to insert the scenario results in your product LCAs.

Tip: For a better watching experience of the video below, we recommend downloading the .mp4 file, instead of watching it directly in your browser

Did this answer your question?